PLA+ Technical Data Sheet

The product is modified based on PLA material, easy to print , in addition ,it improves the toughness and layer adherence. PLA+ is an environmentally friendly material, which is easy to print and has smooth surface. Good strength, rigidity, toughness balance, strong impact resistance, very suitable for functional parts printing; Approved by FDA, safer to use; Can be used for conceptual model, rapid prototyping.

Characteristics	Good toughnessStrong impact resistance High speed printing	Smooth printed surface Easy to print, Hard to break
Applications	Prototyping	Decoration Other mechanical  parts

Processing method •  3D Print, FDM Print testing method Typical value

Physical Properties

Density                                                                                                                                GB/T 1033                                                                                                                                                      1.23                                                       g/cm3

Melt Flow Index                                                                                                               GB/T 3682                                                                                                                                                         5                                     (190℃/2.16kg)

Mechanical Properties

Tensile Strength                                                                                                               GB/T 1040                                                                                                                                                        63                                                            MPa

Elongation at Break GB/T 1040 20 % Flexural Strength GB/T 9341 74 MPa Flexural Modulus GB/T 9341 1973 MPa

IZOD Impact Strength                                                                                                    GB/T 1843                                                                                                                                                         9                                                           kJ/m2

Thermal Properties

Heat distortion Temperature                                                                                     GB/T 1634 Continuous Service Temperature                                                                             IEC 60216 Maximum (short term) Use Temperature Electrical Properties Insulation Resistance                                                                                                     DIN IEC 60167 Surface Resistance                                                                                                          DIN IEC 60093

53 N/A N/A N/A N/A

℃ 1/2

Recommended printing parameters

Extruder TemperatureBuild Platform TemperatureFan Speed                    210- 230℃45-6010040 – 100mm/s%°C Printing Speed

Precautions:

When slicing, it is best to turn on the Z seam alignment and starting point alignment functions, turn off the Z-axis lift and exit, avoid passing through the shell when idling, optimize the slicing printing path, and appropriately reduce the printing speed to achieve the best printing effect.`

Mechanical Properties

Tensile testing specimen GB/T 1040   Flexural testing specimen GB/T 9341     Impact testing B/T1043 specimen

The physical properties, mechanical properties, thermal properties, and electrical properties of the line are obtained based on the injection molding spline test.

Print test condition：

Extruder Temperature                                                                                                                                                            190-230℃

Build Platform Temperature                                                                                                                                                               45℃

Outline/Perimeter Shells
Top/Bottom Layers	4
Infill Percentage	20%
Fan speed	100%
Printing speed Based on 0.4 mm nozzle	40mm/s